Reverse the polarity...
Here you will find step by step instructions on how to reverse the polarity from your vehicles factory harness to your hid kit. Most vehicles come with the positive and negative wires inline with our connects however there are some vehicles where this positive and negative wire is reversed thus needing to be reversed going into the hid kit. This is the number 1 most common issue with hid kit installation. The symptom will be that neither headlight turns on at all when the headlight switch is activated. There will be NO flickering, turn on shut off, or ANY other symptom other than completely NOT turning on if the issue is reversed polarity.
Please follow the steps below to track your order...
There are actually 2 different ways that you can track your order. The first option is via the email sent when you order was processed. The second option would be to log in to your account and go to the order details for the order you wish to track. From there you can click the "Track" button in the shipping details section.
to our D2S/D2R series blog. We've gotten a few requests for a diagram
on the D2S and D2R series installation so here it is. There are a few
things to keep in mind when installing you HID Auto Vision D2 Canbus HID
9004/9007 Pin Configuration...
A very common question we receive is "What is the difference between a
9004 and a 9007 bulb?" The answer is a 9004 and 9007 use the same base
style which is why they are often listed and sold as 9004/9007. Your
bulb size is what determines the bulb will fit and lock [...]
Bulb Connection Identifier...
Often times customers will say "Your bulbs look just like the ones I
have now but what are the extra wires I see?"
The answer is those extra wires you see are the adapter wires. Most
customer recognize the bulb connectors since those are probably all you
had to disconnect to remove your current [...]
HID Auto Vision is proud to announce we are now an official Authorized
Dealer of Oracle Lighting™
Here at HID we strive to bring you the latest and greatest in
automotive lighting. The addition of Oracle Lighting products to our
lineup is intended to bring you the customer, a wide variety of upgrades
to choose from. [...]
Have you been hearing the buzz about LED Headlights? Not sure what they
are or how they work? Pro's vs. Con's? Allow us to explain!
First and foremost let's start with the most common question. What does
LED stand for? LED stands for "Light Emitting Diode". A light emitting
diode is a semiconductor that emits a [...]
Measuring Voltage on Your vehicle...
Here you will find instructions on measuring the voltage on your vehicles factory harness to ensure proper input voltage on your HID Kit. If issues during installation occur this should be one of the first troubleshooting steps in order to ensure that fuses have not blown, voltage is not too high or too low, or voltage is not unstable as your HID Kit requires a stable input voltage of approximately 12v DC - 13.5v DC.
Please follow these steps to fill out a return request...
The following steps will guide you on how to submit a return request. Once your return request has been submitted it will be reviewed by an HID Auto Vision customer support representative. You will either receive an email within 24 hours with an update on your return or a customer service representative may contact you via telephone if more details are needed. Please ensure when filling out the comments section on the return request form to be as detailed as possible so that your return can be processed in a timely manner.
With so many kits and ballast types to choose from it can sometimes be
hard to determine which one you may want or need for your vehicle. Below
is some helpful information on the differences between each series of
ballasts we carry. This is designed to be a general information
reference guide. Compatibility can [...]