1-813-506-8931

How Do I Reverse Polarity on My HID Kit?

  1. This step demonstrates the normal way that you would plug in your ballast power connection. This is the way most vehicles will be connected.

    Reverse Polarity Step 1

  2. Notice the connector locks into the tab on the ballast connection. This is to ensure that the connection does not come loose during normal driving conditions.

    Reverse Polarity Step 2

  3. Take the connector out and flip it exactly upside down and plug back into the ballast. This way the positive and negative wires are exactly opposite. This will not harm your vehicle.

    Reverse Polarity Step 3

  4. Notice that it does not lock into the tab on the ballast connection anymore. We recommend using electrical tape or a zip tie to ensure that the connection is secure and will not come loose.

    Reverse Polarity Step 4

Note: If you are concerned that the plug does not lock into the ballast via the tab on the ballast connection you can remove the pins from the back of the adapter wire and reverse them in the connector. This way you can plug in the adapter plug to the ballast and the tab will lock.

Write a comment

Please login or register to comment